Our commercial roof repair services in Kokomo cover flat membrane roofs, metal panel roofs, interior leak tracing, and large plant roofs with fans and stacks.
We group commercial roof repair services in Kokomo by roof type, so each folder below names the roof it covers and the repairs made on it.
Built for single-ply, built-up, and modified bitumen roofs that still hold together but leak at drains, laps, or a soft area of wet insulation.
Typical Repairs
Covers ribbed and standing-seam panels with loose screws, open end laps, rusted eave panels, and failed skylight or curb flashing.
Typical Repairs
Starts inside under the stain, then moves up to the roof to find the opening, which often sits several feet upslope.
Typical Repairs
Made for plants with exhaust fans, process stacks, pipe supports, and long drain runs, worked in sections around production.
Typical RepairsPick the picture closest to your roof. Each one points to the service that starts the work.
Membrane roofs with drains in the field start with flat roof repair at the seam, drain, or blister.
Screw rows, laps, and rusted eave panels point to metal roof repair.
Water that shows up indoors first needs a trace from the ceiling to the opening.
Plant roofs with process exhaust and equipment curbs need industrial roof repair worked around production.
Describe the roof and the leak on the phone. We will tell you which service fits and set up an inspection.
(463) 466-9764Call UsWhatever the roof, the first visit looks at the same details so the repair targets the opening.
Each roof gets walked edge to edge. Problem areas are marked on a sketch and photographed with the date.
Meter readings and a few cores tell dry areas from wet ones, which sets how big each repair is.
Repairs are listed by location and detail, with the material that matches what is on the roof now.
The listed repairs are made and every detail is photographed before the roof is closed up.
Same roof questions, different answers for each service.
Membrane seams, drains, blisters, and wet insulation. Repairs match the existing sheet: TPO welds to TPO, EPDM bonds with primer and tape.
Fasteners, laps, eave panels, and skylights on steel roofs. Panels are swapped to the same profile and gauge.
Water found inside first. Tracing runs from the stain through the deck to the roof detail that opened.
Plant roofs with fans, stacks, pipe racks, and residue. Work is staged around hot work permits and line shutdowns.
How the services overlap and how to choose between them.
Yes. A plant with a membrane roof over the offices and a metal roof over the shop gets both inspected on the same visit, and the scope lists repairs for each roof.
Leak repair is the tracing step. Once the opening is found, the fix itself uses flat or metal roof methods, so the services work together on one job.
Yes. Older Kokomo buildings often have built-up or modified bitumen roofs. Patches use compatible asphalt-based materials, and cores show how many layers sit on the deck.
On a metal roof, skylight panels and their laps fall under metal roof repair. On a membrane roof, the skylight curb flashing falls under flat roof repair.
Many can. Cold-weather patches and temporary dry-ins hold through winter, and full seam welding or panel swaps follow when the roof is dry and warmer.
Call or request an estimate. We will inspect the roof and send a scope that names each repair by service and location.